holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 12L - NAVIGATION SYSTEM
  • GENERAL DESCRIPTION
    • VEHICLE SPEED AND DIRECTION
    • GLOBAL POSITIONING SYSTEM
    • DIGITAL ROAD MAP
    • 1.1 GENERAL OPERATION
    • 1.2 COMPONENT LAYOUT
  • 2. OPERATING INSTRUCTIONS
  • 3. SERVICE OPERATIONS
    • 3.1 PROCESSOR ASSEMBLY
      • PROCESSOR
      • MOUNTING BRACKETS
    • 3.2 REMOTE CONTROL ASSEMBLY
      • REMOTE CONTROL CRADLE WITH PRESENTER
      • PRESENTER MOUNTING WEDGE
    • 3.3 DISPLAY ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 3.4 NAVIGATION SPEAKER ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 3.5 NAVIGATION WIRING HARNESS
      • REMOVE
      • REINSTALL
    • 3.6 COCKPIT NAVIGATION WIRING HARNESS
      • REMOVE
      • REINSTALL
    • 3.7 GPS ANTENNA ASSEMBLY
      • REMOVE
      • REINSTALL
    • 3.8 FITTING A NEW FLOOR CONSOLE COVER ASSEMBLY
    • 3.9 FITTING A NEW FLOOR CONSOLE ASSEMBLY
    • 3.10 NAVIGATION SYSTEM CALIBRATION
  • 4. SYSTEM DIAGNOSIS
    • PREREQUISITES
    • 4.1 WIRING DIAGRAM
    • 4.2 CONNECTOR CHART
    • 4.3 NAVIGATION SYSTEM DOES NOT START
      • CONDITION ONE
      • CONDITION TWO
      • CONDITION THREE
    • 4.4 NO RESPONSE FROM REMOTE CONTROL
      • NO RESPONSE FROM REMOTE CONTROL
      • CONDITION ONE
      • CONDITION TWO
    • 4.5 CD–ROM ERROR
      • CONDITION ONE
      • CONDITION TWO
      • CONDITION THREE
    • 4.6 AUDIO PROBLEMS
    • 4.7 GUIDANCE PROBLEMS
      • CONDITION ONE
      • CONDITION TWO
      • CONDITION THREE
      • CONDITION FOUR
    • 4.8 DISPLAY QUALITY
    • 4.9 DISPLAY DIMMING INOPERATIVE
    • 4.10 VEHICLE DIRECTION INCORRECT
  • 5. PROCESSOR DIAGNOSTICS
    • 5.1 ACCESSING DIAGNOSTIC MENU
    • 5.2 READ I/O STATE
    • 5.3 SET I/O STATE
    • 5.4 READ GPS DATA
    • 5.5 READ ERROR MEMORY
  • 6. TORQUE WRENCH SPECIFICATIONS
  • 7. SPECIAL TOOLS